Furuno FELCOM 250, Operator'S Manual, Page: 81 / 184

3. SETTINGS FOR HANDSET
3-19
1. In the alert information window, select [New SysMsg] and press the Enter key.
The most recent system messages appears. A maximum of 10 system messages
can be saved, however the messages are erased when the power is turned off.
2. If there are more than two alert messages, press
W
and
X
to cycle through the
messages. Use W to go back one message, and X to go forward one message.
3. Press the Enter key to close the message.
Note: You can also display system messages with the [Sys Msg] icon in the main
menu.
3.7 Device List
The Device list displays a list of all devices (communication unit, handset, incoming
indicator).
1. At the idle screen, press the Enter key to open the main menu.
2. Press W , T to select the [Device] icon and press the Enter key. The message
"Detecting" appears while the list is being prepared. When the search is complet-
ed, the [Device list] screen appears.
3. Press the key to close the menu.
Msg #/Total msg # saved
Communication Unit
Incoming Indicator
Handset