Furuno FELCOM 250, Operator'S Manual, Page: 143 / 184

6. WEB FUNCTIONS
6-29
Change priority of IP filter screen
Common settings screen
On the menu bar, click [Settings], [Network settings], [PPPoE], [Common settings] to
show the Common settings setting screen.
Direction Show direction (WAN
→
LAN, LAN
→
WAN).
DST. address Enter, edit destination address (IPv4 address).
From address Enter, edit source address (IPv4 address).
Protocol Select protocol (ALL, ICMP, Any, TCP/UDP).
• Select protocol (ALL, ICMP, Any, TCP/UDP).
• If [Protocol] is [Any], displays the protocol number (1-
255).
• If [Protocol] is [TCP/UDP] only, select TCP/UDP,
TCP, UPD from list box. Enter port no. (range: 0-
65535).
Add button Add data, on the IP filter screen.
Save button Register entered data.
Cancel button Restore previous settings and return to the IP filter set-
ting screen.
Item Description
Raise priority. (Right button: inoperative)
Lower priority. (Right button: inoperative)
Apply button Save entered information. Return to the IP filter setting
screen.
Cancel button Restore previous IP filter settings and return to the IP filter
setting screen.
Item Description