Furuno FELCOM 250, Operator'S Manual, Page: 120 / 184

6. WEB FUNCTIONS
6-6
4. Click the [Add extension] button. The screen shown below appears. The number
that is shown in the [Number] box is the youngest empty unused extension num-
ber. To use that number, go to step 6. To change the extension number, go to step
5.
5. Change the extension number (1000 - 9999) in the [Number] box.
6. Enter the extension number password in the [Password] box. A maximum of eight
characters (capital letters only) can be entered.
Note: Be careful not to lose the extension number password. Write it down. This
password is necessary for setting the SIP password.
7. Enter a name for the extension number in the [Note] box. A maximum of 50 char-
acters can be used (use an easy-to-remember name, like the location of the ex-
tension).
8. Select the line for which to limit call time, in the [Call limit] box. Choose from
among No limit, Extension only, Incoming only, Outside only.
9. Set the parameters for outside lines at the [Voice ring] box. Check “1st” to ring that
terminal first. For no ring, uncheck “1st”. Check “2nd” to ring 2nd terminal if there
is no pick up for the specified period at the terminal checked as 1st. See page 6-
2 for how to set ring duration time on the PBX settings/Incoming routing/Voice
screen.
10. Set the parameters for facsimile at the [Fax ring] box. The setting procedure is the
same as that for [Voice ring].
11. Click the [Add] button, and the message "Completed" appears.
Note: If the extension number is already registered, the error message "This num-
ber has already been registered." appears. Redial inside line number.
12. Click the [OK] button to erase the message.
How to edit extension numbers
You can edit the extension number, password, etc.
1. Display the Extension screen.
2. Click the [Edit] button at the right side of the extension to edit.
3. Edit extension number, extension number password (SIP password). If the exten-
sion number selected at step 2 is from an analog port, the [Password] box does
not appear.
4. Click the [Save] button.
5. Click the [OK] button to erase the message.
6. If you edit the extension number, or extension number password (SIP password)
in step 3, set the same value in the [Client set.] menu of the handset (refer to
3.5.3).