Furuno FELCOM 250, Operator'S Manual, Page: 110 / 184

5. WEB SOFTWARE
5-26
Note 1: You can find the latitude and longitude at the time a call ended and RX signal
level by putting the cursor on the date on the Voice call log display. If there is no data
(old log, no GPS data) “--°--’--”, ---°--’--” appears.
Note 2: You can show the details of an event code by clicking the event code on the
Voice call log display. Click the [Back] button to return to Voice call log display.
5.9.4 How to view the Data connection log
To view the Data connection log do the following:
1. Click [Log] in the menu bar.
2. Click [Data connection log]. The Data connection log screen displays:
1) Date of start of communications
2) Communication time (If currently connected, “Connected” appears.)
3) Data volume during connection
4) Connection service (Standard, 8kbps, 16kbps, 32kbps, 64kbps, 128kbps,
256kbps
5) Group name/session name at time log was saved
6) Connection point
7) Event code (“--” appears)
“---” appears at 4, 5, 6 above if, when connected to the internet with PPPoE, the
entered user name is not registered in the Web software.
3. To search the log, do the following:
1) Click the [Search] button to display the Search bar. (Click the [Search] button
again to hide the Search bar).
Search Bar