Furuno FELCOM 250, Operator'S Manual, Page: 78 / 184

3. SETTINGS FOR HANDSET
3-16
14. Enter the default gateway (IP address of the router) and press the Enter key.
15. Press the key to return to the [Manual set.] menu.
16. Press 2 to select the [DNS] menu to show the [DNS obtain] screen.
17. Press
S
or
T
to select the method for obtaining the DNS server address.
[ Static ]: Set Primary and Secondary DNS server addresses manually.
[ DHCP ]: Obtain DNS server address automatically from the DHCP server.
18. Press the Enter key. Do one of the following depending on selection made at step
17.
If you select the [static] at step 17, the DNS entry screen appears. Go to step 19.
If you select the [DHCP] at step 17, the [Manual set.] screen appears. Go to step
24.
DNS factory default settings
19. With the [DNS (Primary)] field selected, press the Enter key.
20. Enter the IP address of the primary DNS server and press the Enter key.
21. Press T to select the [DNS (Secondary)] field, and press the Enter key.
22. Enter the IP address of the secondary DNS Server and press the Enter key.
Note: If only the Secondary DNS Server address is entered, the Primary DNS is
set to the same value.
23. Press the key to return to the [Manual set.] menu.
24. Press the key to close the menu.