Furuno FELCOM 250, Operator'S Manual, Page: 112 / 184

5. WEB SOFTWARE
5-28
3. To search the log, do the following:
1) Click the [Search] button to display the Search bar. (Click the [Search] button
again to hide the Search bar).
2) To search by date, enter part or all of the date in the [Date] field. To search by
event, enter part of the event code in the [Message] field. Matching search re-
sults display below the Search bar.
Note: To display a specific log ([HUB], [SIM], [Handset], [ADE], [Modem]) se-
lect the log to display from the [Block] list box.
4. To arrange the log in ascending or descending order, do the following:
1) At the top of the log list, click either [Date], [Block], [Message], or [Code]. S
appears beside the selected item.
2) Click the item again to change between S (ascending) or T (descending) or-
der.
Note: Select [HUB], [SIM], [Handset], [ADE], or [Modem] from the [Block] list-
box to view the selected item only.
5. To save the log to a CSV file, click the [Save CSV] button. (refer to section 5.9.2
for complete information).
The Event log additionally records the latitude and longitude (at the time a com-
munication ended), CN0 (RX signal level), Message (message only shown when
there is an event code).
Note 1: You can find the latitude and longitude at the time a call ended and RX signal
level by putting the cursor on the date on the Event log display. If there is no data (old
log, no GPS data) “--°--’--”, ---°--’--” appears
Note 2: The details of an event code can be displayed from the Voice log by clicking
the event code. To return to the Voice log, click the [Back] button.
Action