Furukawa S178 Ver.2, User Manual

Page: 53 / 65

Programming Guide
8-21
8.5.2. Counter
1.
Select a Setting item in the “Counter“ list and press Enter key.
2. Pop-up window shows available functions. Press
▲ ▼
keys to select
desired function and press Enter key.
3. Pop-up window shows available setting. Press
▲ ▼
keys to select desired
setting and press Enter key.
4. Press Escape key and a pop-up window prompts the operator to confirm the
change. Select “Over write” to confirm the change, or “Cancel” to cancel the
operation and press Enter.
5. Repeatedly press Escape key until the Ready screen is displayed.
Available settings for each Item
Setting Title Functions
Counter Reset Alarm On/Off Alarm Count

Arc

Cleaving

Stripping

Splicing
Do not Reset
Reset Off
On Displaying the current count can be
adjusted to any count. Select a digit
with ◄ ► and press
▲ ▼
to
increase/decrease the value. When
“+ “ is selected, press
▲
key to
advance to 32767 or press
▼
key to
advance to 0

Total Arc Not Available
8.5.3. Data
1.
Select “Before Splicing” or “After Splicing” in the “Data“ list and press Enter key.
2. Pop-up window shows available setting menus. Press
▲ ▼
keys to select
desired setting and press Enter key.
3. Pop-up window shows
“On/Off”. Press
▲ ▼
keys to select desired setting and
press Set key.
4. Press Escape key and a pop-up window will prompt the operator to confirm the
change. Select “Over write” to confirm the change, or “Cancel” to cancel the
operation and press Enter.
5. Repeatedly press Escape key until the Ready screen is displayed.
Data which can be displayed
Process for Data Display Data
Before Splice

Cleave Angle

Clad Offset

Core Offset

Attenuation Loss
After Splice

Cleave Angle

Clad Offset

Core Offset

Estimation Loss

Detailed Loss

Splice Result Icon
(
When “Estimamation Loss” is "On", it is active.)

“Data Output” in the “Parameter” must be “Active” to display the data.