Programming Guide
8-3
8.2. Program Edit
1. Select
“PRGM Edit” in the Menu screen and press Enter key.
2. Select
“Fusion” or “Heater” and press Enter key.
The following procedures and pictures are for Fusion program editing; however,
the same procedure can be applied to the Heat programs.
3. Stored program list is displayed (as shown in picture to the right). Comment for
highlighted program can be displayed by pressing ► key, and turned off by
pressing◄ key.
4. Select a program to be modified by pressing enter key and press Menu key to
access to pop-up menu. Select a function and press Enter key.
Setting: Modifying main parameters.
Detail Setting: Modifying detail parameters.
Default: Return the parameters to default value.
Copy: Copy the program and store with a new name.
Delete: Erase the program from the program list.
Edit: Editing comment of the program.
8.2.1.
Setting
1. Select
“Setting” and press Enter key in the pop-up
menu.
2. Select
“Splice” or “Inspect” tab with◄ ► keys. Select
parameters with
▲
▼
keys and press Enter to edit.
3. Change
the
parameter
with
◄
►
keys
(increase/decrease appropriate digits) and/or
▲
▼
keys (actual value) , and press Set key.
4. Press Edit End, the pop-up menu will show and ask
following questions.
Over Write: Replace the parameter with the edited
value.
Other Location: Store the program with new/changed
parameter to a new location as a new program.
Cancel: Cancel the change and return to the previous
screen.
5. Return to the parameter list. Select another parameter for editing or press Escape to complete the edit.
8.2.2.
Detail Setting
1. Select
“Detail Setting” and press Enter key in the
pop-up menu.
2. A more detailed set of parameters is possible. The
setting method is the same as "Setting".
Press
▲
▼
keys : to move one by one item
Press Enter key : to move to next page