Funkwerk DECT80, Operating Instructions Manual, Page: 55 / 84

53
System-PIN
The PIN is a four-digit “secret” number used for protecting the system and the handsets against
unauthorized access. You must enter the system PIN to make system settings at the base station.
Change PIN
The factory default system PIN is “0000”.
Handset is idle.
Press Menu , select Settings and press OK .
Select and press OK .
Select and press OK .
Enter the old 4-digit PIN (default „0000") then press OK .
Enter a new, four-digit PIN and press OK .
Enter the PIN once again as a validation check and then press OK . The new
system PIN is then saved.
Please contact our hotline if you have forgotten your PIN.
If you enter an incorrect PIN, the error signal sounds and the following message appears in the
display: “WRONG PIN". You can enter the PIN again after a few seconds.
Change PIN
Setup Base