manualshive.com logo in svg

Funkwerk DECT80, Operating Instructions Manual, Page: 37 / 84

Share
Download
Funkwerk DECT80 Operating Instructions Manual Download Page 37

35

Send SMS

The as-delivered default setting for SMS Center 1 is the SMS Center of Deutsche Telekom (number:
0193010). This means that you can send SMS messages directly (without any further preparation).

If you have several SMS Centers entered, you can select the service center for sending the next
SMS message using the menu "Info/SMS/Settings. After that SMS has been sent, the phone will
automatically revert back to SMS Center 1.

Receive SMS

You must be registered at an SMS Center in order to receive SMS messages via that center. You
can do this with the SMS Center of Deutsche Telekom using a toll-free SMS (see page 37).
You can also register at three other SMS Centers for receiving SMS messages from different service
providers. Once you have registered with an SMS Center, no further action is necessary for receiving
SMS messages via that center.
You must enter the numbers for these SMS Centers for SMS Centers 2 - 4 (see page 36). 
Consult your service provider to determine what registering/deregistering information you must send
to the SMS Center.

You can not send any SMS messages at all if you delete the number for SMS Center 1!
Resetting the base station to the as-delivered default settings reactivates the defined number for 
SMS Center 1 and you can then begin sending SMS messages again.

Summary of Contents for DECT80





















































































Reviews:

No comments