First steps
Programming
41
First steps
This chapter describes how to put the radio set into operation.
Programming
Before using the radio set in daily operations for the first time, it must be programmed
with all required operational data and the desired function options and parameters.
The programming procedure requires a configuration tool, consisting of a PC and a
configuration program. Consult your specialist dealer.
The data to be programmed take into account the operating conditions as well as
individual requests from the operator/user. They are stored in the radio set.
If required, the settings can be saved on a microSD card.
Putting the radio set into operation
Prerequisite:
A frequency must have been assigned for TETRA operation.
The radio set must be programmed.
The trunking mode (TMO) must be activated if the radio set is to be used within a
TETRA infrastructure.
Perform the following steps:
1.
Carefully place the antenna on the antenna socket of the radio set.
Step 1: The FT4 is shown here
Note:
Use the appropriate type
of antenna (UHF or VHF)
for your devices, with the
version matching the
preset radio frequency. If
necessary, consult your
system administrator.
