manualshive.com logo in svg

Funktel TETRA FT4, Operating Manual

Share
Download
Funktel TETRA FT4 Operating Manual Download Page 30

Design and function

Display

30

Screen saver

The screen saver is activated automatically when the radio set is on and you have 
not pressed a key for a certain amount of time.

B3

B1

B6

B5

B4

B2

Screen saver on the display

Legend 

No. Designation/function

B1

Current time.

B2

Designation or name of user to whom the radio set was issued. This name is 
permanently linked to the call number of the radio set (ISSI).

B3

Call number (ISSI) at which the radio set can be reached in the TETRA infra-
structure.

B4

Number of missed calls. 

B5

Number of unread messages.

B6

Indicates the personal emergency signal mode if the radio set is logged into 
the personal emergency signal centre. Additional information is to be found in 
Chapter „Personal Emergency Signal (PES) Functions“ > „Logging in to the 
personal emergency signal centre“ (p. 125).

TIP

The waiting time until the screen saver is automatically activated was programmed 
individually by the operator. If you have any questions, please contact the responsi-
ble system administrator for your communication facilities.

Summary of Contents for TETRA FT4

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands