manualshive.com logo in svg

Funktel TETRA FT4, Operating Manual

Share
Download
Funktel TETRA FT4 Operating Manual Download Page 113

Personal Emergency Signal (PES) Functions

Will-dependent emergency signal functions

113

Personal Emergency Signal (PES) Functions

This chapter describes the emergency signal functions. Due to the integrated sensors 
and safety functions, you can use the radio set for security purposes during hazard-
ous (single-person) jobs by connecting to a system-compatible personal emergency 
signal centre.

Will-dependent emergency signal functions

Will-dependent emergency signal functions are triggered by the user by an intentional 
action.

Control elements

The radio set offers the following control elements for triggering a will-dependent 
alarm or warning alarm.

Control elements for triggering will-dependent alarms or warning alarms 

Designation

Function

‹Alarm› (2)

Triggering of a personal alarm (will-dependent alarm). 
Decide for yourself if you wish to trigger Alarm 1 or Alarm 2:

Alarm 1: Press key for more than 1 second.

Alarm 2: Press key briefly three times.

‹Function key 1› (2)

Triggering a warning alarm. Decide for yourself if you wish to 
trigger Warning alarm 1 or Warning alarm 2:

Warning alarm 1: Press key for more than 1 second.

Warning alarm 2: Press key briefly three times.

TIP

If the radio set is not logged into the personal emergency signal centre, the control 
elements may have different functions, see chapter „Design and function“ > „FT4 / 
FT5 control elements“ (p. 16).

Summary of Contents for TETRA FT4

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands