“Device functions by speed dial” key functions
The table below lists device functions (options) that can be configured to enable them
to be accessed and triggered by means of speed dial (quick access) with the aid of
the
‹0-9 numerical keypad (12)›
. If necessary, the yellow
‹Function key 1 (3) / F1
(Warning)›
can also be configured for quick access, insofar as a warning alarm func-
tion is not to be used on the radio set. In addition, the
‹F2 and F3 (4/5)›
function keys
can also be used for speed dial key functions on the FT4.
Key functions
Function
Operation
Prerequisite or special
features
Options:
0-9
keys and
F1
(warning)
No function
Toggle TMO/DMO
To toggle the screen
saver
Send position (GPS/
LIP)
Group call
PTT call
Call
Send message
Exclusive options:
F1
Warning and
F2/F3
(FT4)
Group selection
Scroll up
Scroll down
Quick access with the
0-9
keys of the numeric
keypad:
Press the preferred
numeric key for approx. 2
seconds until the function
is triggered.
Quick access with the
yellow
Function key 1
:
A brief keystroke triggers
the key function that has
been configured.
Only possible if the idle
display is shown and the
keypad is not locked.
The yellow
function
key 1
(F1 Warning) can
then only be used for
quick access if a warning
alarm is not configured.
Quick access with the
F1
Warning key and the
F2/F3
keys of the FT4 is
also possible in the sub-
menus but not if the
keypad is locked.
Switching between
TMO/DMO is not possible
when logged in to Security
Mode.
Operation
“Device functions by speed dial” key functions
112
TIP
Consult the system administrator who is responsible for the personal emergency
signal system as to whether the key functions on your radio set are set up for quick
access and regarding those that can be added if required.
