FUNAI LT840-M19, Owner'S Manual

Page: 12 / 30

EN
12
OPERATIONS
To select a channel
Press
PROG.
K
/
L
(control panel)
or /
(remote
control) repeatedly to select your desired channel.
or
Press the Number buttons to enter a channel number then
OK
for quicker access.
To adjust the volume
Press VOL.
X
/
Y
(control panel) or +/– (remote
control)
to adjust the audio volume.
Press to turn on or off the sound right away.
You can easily find a channel you want.
1
Press OK while watching a programme.
2
Press
K
/
L
to select the channel you want to watch,
then press OK .
3
Press BACK to exit.
You can set the unit to be turned off automatically after a set
time period.
1
Press
SLEEP
.
2
Press
SLEEP
repeatedly to change the sleep time
period.
• Each time you press SLEEP , the timer increases by 30
minutes up to 120 minutes.
You can switch the input mode to TV mode or external input
mode.
1
Press
SOURCE
.
2
Press
K
/
L
to select the input mode you want, then
press OK .
You can change the TV colour system in video or scart mode.
Press COLOUR SYSTEM repeatedly to select the colour
system you want, then press OK .
( [Auto] , [PAL] , [PAL 60] , [SECAM] , [NTSC] , or
[NTSC 4.43] )
Watching a TV Programme
(e.g.) If you want to select the channel 24 without pressing
OK
, press
2
first, then press
4
within 3 seconds.
Note: You can recover the original volume by pressing again or
+/– (remote control)
.
Channel List
Locked Channel
Decoded Channel
Note:
Press
0
/
1
to move to the previous or next page.
Note:
You can edit the channel list at “Channel Settings” (p. 19).
DTV ATV
20 Volume
Stumm
DTV ATV
Channel List -DTV-
18. ETV
19. Euro CH
20. Drama Now!
21. WNS
22. BCT
23. 24 Movies
1. EUT1
2. EUT2
3. EUT3
4. CCT
5. K7
6. CBN
1. EUT1 Radio
710. Hot music
711. Kids station
713. WA World
715. ASA1
716. KAR weather
Channel List -DTV- Channel List -ATV- Channel List -Radio- Channel List -ATV- Channel List -Radio-
<DTV> <Radio> <ATV>
Sleep Timer
Note: • Press SLEEP repeatedly until [Off] appears to cancel the sleep
timer.
• If you disconnect the unit from the AC outlet or if a power failure
occurs, the sleep timer will be cancelled.
Switching the Input Mode
Colour System
Note: When you select [Auto] by pressing COLOUR SYSTEM , this unit
will distinguish the system automatically according to the input signal
from the external devices.
DTV ATV
120 Sleep min.
DTV ATV
Select Input
DTV
ATV
SCART
VIDEO
COMPONENT
1 HDMI
2 HDMI
PC
Select Input