1
3
KNOW YOUR PRODUCT
Refuelling the generator
1.
Switch off engine by moving the OFF/RUN/CHOKE switch
(
6
to the OFF position (Fig. 7) .
2.
Remove the fuel cap (1) by rotating in a anti-clockwise
direction (Fig. 8).
3.
Lift out the fuel filter and visually check the fuel level
(Fig. 9).
4.
Replace the fuel filter and, if necessary, add fuel to the
tank (91 RON Unleaded Petrol). Do not overfill the fuel
tank (Fig. 10). Do not use ethenol blended fuels.
5.
After refuelling, make sure the fuel cap (1) is closed
properly and securely.
6.
Fuel stabiliser to be used at all times.
ON
STOP
START
ON
STOP
START
REMOTE CONTROL
ON
OFF
REMOTE CONTROL
12V DC 8.3A
12 V APPLIANCE OUTLET 8.3A
5V DC USB
BATTERY POWER
OVERLOAD RUN LOW OIL
STOP
ECONOMY
ON
ON
OFF
240V
OFF
STOP
START
ON
Fig. 9
Fig. 7
Fig. 8
Fig. 10
WARNING!
Be careful not to spill fuel when refuelling. Spilled fuel or fuel vapour
may ignite. If any fuel is spilled, make sure the area is dry before starting the engine.
WARNING!
Keep away from cigarettes, smoke and sparks when refuelling the
generator. Always refuel in a well-ventilated location.
PRE-OPERATION CHECK (cont.)
Summary of Contents for SD2200i
Page 3: ...3 KNOW YOUR PRODUCT cont...
Page 29: ...29...
