Full Boar SD2200i, Instruction Manual

Page: 17 / 30

17
OPERATION (cont.)
AC Applications
1.
Start the engine and make sure the output indicator LED (green)
(12)
illuminates. (see “
Starting the engine
”)
2.
Confirm that the equipment to be used is switched off, and
insert the plug of the equipment to be used into an AC socket
(23)
(Fig. 27).
Note. If the connected appliance does not operate, refer to the overload indicator section on the
previous page.
Fig. 27
AC Electric lamps Power tools Electromotor DC battery
Power factor 1 0.8-0.9
0.4-0.7
(Efficiency 0.85)
Rated voltage
12V
Rated current 8A
0 - 2 0 00W
0 - 1
40
0W 0 -
60
0W
Only use model No. DPC-Au02 for parallel connection or warranty will be null and void.
AC Parallel Operation
Check the total rating of the appliance to be connected and ensure the rating of the appliance/s
does not exceed the rating of the generator.
Before using the AC output, turn the AC switch(24) to the
ON position.