18
Batt
Batt
Digital Display:
• When the key is turned to the on position the screen will
light and display battery capacity on the bottom line.
• Once the generator is running the generator output (U)
voltage (top line) should display 240V.
• When the appliance (AC) is plugged into the socket
and turned on, its current (I) and power draw (P) will be
displayed on lines 2 and 3 respectively.
• While the generator is operating the run time (T) is
displayed on line 4 measured in hours.
Digital Display Overload Indicator:
• In the event of an overload or fault in a connected
appliance, the digital display will display the error
message “OVER” on line 3. The overload system will need
to be reset if this occurs.
• The overload system prevents the generator from
delivering power, however the engine will continue to run.
• To reset turn the generator off and restart.
Oil alert indicator
• The oil alert system is designed to prevent engine damage
caused by an insufficient amount of oil in the crankcase.
Before the oil level in the crankcase falls below a safe limit,
the oil alert system will automatically shut down the engine
(the engine switch will remain in the “ON” position).
• If the oil alert system shuts down the engine, the oil alert
indicator light (red) (14) will come on when you operate the
starter, and the engine will not run (Fig. 20). If this occurs,
add engine oil.
OPERATION (cont.)
Batt
Batt
Fig. 19
Fig. 20
Summary of Contents for FBT-3300
Page 33: ......
