Full Boar FBT-3300, Instruction Manual

Page: 15 / 34

15
KNOW YOUR PRODUCT
Preparing to start
Note.
Before starting the engine, disconnect all appliances from the generator.
1.
Set the fuel valve (10) to the “ON” position (Fig. 11).
2.
Put the electric start key (7) into the engine switch (18),
and turn it to “ON” position (Fig. 12).
Starting the engine:
There are three ways in which the generator can be started:
Manual start, Key start
and
Remote start
.
Note.
Before starting the engine, disconnect all appliances from the generator.
Manual start
1.
Follow steps 1 to 2 in the
“Preparing to start”
section
above.
2.
Hold the generator steady with one hand. With the other
hand, pull slightly on the recoil starter (4) until you feel
resistance (Fig. 13) and then pull hard and swiftly. Do not
let the recoil starter retract by itself, guide it back by hand.
3.
After the engine starts, allow it to warm up for a short period of time.
4.
When using the manual start method, make sure that you use the key to turn the engine
off after operation (not the remote control).
Note: Pressing and holding the emergency stop button (24) will stop the generator from all
starting modes.
OPERATION
OFF
ON
ON
STOP
START
ON
STOP
START
ON
STOP
START
REMOTE CONTROL
ON
OFF
REMOTE CONTROL
12V DC 8.3A
12 V APPLIANCE OUTLET 8.3A
5V DC USB
BATTERY POWER
OVERLOAD RUN LOW OIL
STOP
ECONOMY
ON
ON
OFF
240V
OFF
STOP
START
ON
Fig. 11
Fig. 12
Fig. 13