manualshive.com logo in svg

FULGOR OVFS9-10, Use & Care Manual, Page: 25 / 36

Share
Download
FULGOR OVFS9-10 Use & Care Manual Download Page 25

 

25

This makes it possible to reach the desired timer setting more quickly. From the tenth consecutive 
increase/decrease of the timer setting, the speed at which the value changes increases. 

 
Duration of the warning 

When the time set on the timer has run out, a beep sounds for 1 minute, or indefinitely (this option is 
also configurable), and the timer displays flash the indication <00> 
o 

1-minute alarm: 

After 1 minute from when the timer alarm starts, the beep stops. The timer displays 

continue to flash with the indication <00>. The alarm can be cancelled by the user at any time, even 
during the first minute of the alarm, by pressing any sensor on the touch control. 
o 

Indefinite alarm: 

The beep does not stop until the alarm is cancelled by the user. It can be cancelled 

by pressing any of the sensors on the touch control. 
 

Auto power-off 
 

If the power level is not changed during a preset time, the corresponding heater turns off automatically. 
The maximum time a heater can stay on depends on the selected cooking level. 

Power 
level

 

Max. time 
on 
(hours) 

 

1 10 

2 5 

3 5 

4 4 

5 6 

6 2 

7 2 

8 2 

9 1 

ATTENTION: if the pyroceram plate should break, turn off the power supply immediately 
and call service centre. 

 

 

3.8 GLASS CERAMIC WORKTOP 

 

The new design concept heating elements make it possible to reach maximum power in a few 
seconds. Furthermore, the ultra-thick fibreglass insulation prevents heat dispersion, limiting 
heating to the silk screen-printed zones only. The 4  (or 5) heating zones are controlled by 2 
switches and 2 (or 3) energy regulators. 
The 

switch 

 controls power in W, which is pre-defined according to the position set on the 

knob. 
The 

energy regulator 

is a device which regulates power gradually according to the position 

set on the knob ( % of maximum power). Control of the heating zones is automatic, by 
activating or disabling the heating elements at regular intervals, thus ensuring precise, uniform 
heating. E.g.:  short heating periods and long pauses indicate low temperature; long heating 
periods and brief pauses indicate a higher temperature.  With the energy regulator, you can 
totally or partially heat a particularly zone of the glass ceramic top. 
 

 

Summary of Contents for OVFS9-10





































Reviews:

No comments