Fukuda Denshi LX-7230, Operation Manual

Page: 21 / 112

1
1. General Description
The LX-7230 is a radio telemetry transmitter designed to measure the ECG,
respiration waveform, SpO
2
(arterial oxygen saturation), pulse waveform with
two “AA” size (“LR06” size) alkaline batteries.
Information such as ECG measurements, respiration waveform, SpO
2
measurements
,
pulse waveform, battery level, and the conditions of the ECG
electrodes and SpO
2
probe (sensor) are displayed on the LCD of the front
panel.
ECG lead selection is available using the two buttons (Enter and
▽
)
on the
front panel. (In case of using a 3-electrode lead cable or a 5-electrode chest
lead cable)
The LX-7230 can also function as a transmitter to measure only the
ECG/Respiration without SpO
2
or to measure only the SpO
2
without
ECG/Respiration.
Before using the LX-7230, read also the operation manual of the patient
monitor at the receiving side thoroughly.
There are two types of transmitters depending on the SpO
2
Module, which is
built-in as below.
LX-7230N ： Built-in Nellcor
®
SpO
2
Module
LX-7230KM
：
Built-in Konica Minolta
®
SpO
2
Module
External Appearance
LX-7230N LX-7230KM