Fukuda Denshi FCP-7101 Service Manual Download Page 41

Page: 41 / 170

Maintenance

3 - 7

ECG Test Pattern

This section explains how to select the built-in electrocardiogram (ECG) test pattern
waveform to use during an operation check or demonstration.

1. Select [ECG TEST PATTERN] on the [SETUP MODE (MAINTENANCE)]

screen, and the ECG TEST PATTERN selection screen is displayed.

2. Select a desired test pattern using the [

←

] or the [

→

] key, and push the

[MODE] key to return to the inspection.

3. The following test patterns are available.

Pattern Description

Test pattern waveform is invalidated.

Normal pattern waveform

Irregular heartbeat pattern PVC

Since test pattern information is not backed up, [NONE] is always
selected at the time of power ON.

NOTE

Summary of Contents for FCP-7101











































































































































































Search results

Summary of Contents for FCP-7101

Reviews:

Brands by name

Popular brands

Fukuda Denshi FCP-7101, Service Manual

Search results

Summary of Contents for FCP-7101

Reviews:

Brands by name

Popular brands