Fukuda Denshi FCP-7101, Service Manual

Page: 15 / 170

Component Names and Functions
1 - 3
Operation panel
The electrocardiograph can be operated on the operation panel. The LED
that indicates the operation status is at the upper right-hand corner of the
operation panel.
MODE
FCP-7101
Main
Power
ON/OFF
(stby)
Charge
POWER
OFF:HOLD 2Sec.
LEAD
1mV
RESET
SENSE
START/STOP
ID
ENTER CANCEL
(2) [MODE] key
(6) [ID] key
(8) [START/STOP] key
(7) [SENSE] key
(4) LEAD [ ] and [ ] keys
(5) [RESET] key
(3) [1mV] key
(1) [POWER ON/OFF] key
(9) LED
(1) [POWER ON/OFF] key
Turns ON/OFF the power.
If AC power is set to OFF, charging of the battery, if provided, is started.
(2) [MODE] key
Press this key to select diagnosis mode and setting.
(3) [1mV] key
Press this key to display and record waves calibrated in 1mV.
The key moves the cursor upward on the setting screen.
(4) LEAD [ ] and [ ] keys
Press these keys to change the leads to be monitored.
The key moves the cursor horizontally on the setting screen.
(5) [RESET] key
Press this key to reset the ECG waveform to baseline state.
The key moves the cursor downward on the setting screen.