Fukuda Denshi CardiMax FX-8322, Service Manual

Page: 129 / 142

Chapter 12 Daily and Periodic Checks
12-15
12-3-5-3 I/O Test
(1) Select [I/O test] in the manufacturer maintenance selection screen shown below.
The I/O test is a test for checking the operation of each I/O.
(2) When you select [I/O test], the following screen is displayed.
(3) To perform the I/O test, the I/O to be tested needs to be set to the following state in advance.
y
LAN: Connect a PC to the ECG using a cross cable.
At this time, set the IP address on the PC to 192.168.2.127.
y
Serial 1/2: Connect a return cable to the serial port 1/2.
y SD card: Insert a specified SD card into the SD card slot.
y
USB memory 1/2: Insert a specified USB memory into the USB port.
y
FLASH ROM: No setting.
* Contact us for the list of specified SD cards and USB memory.
(4) To start the I/O test, touch the I/O button corresponding to the I/O item that has been set to the condition
described above. To end the test, touch the button of the currently running I/O test again. It is not possible to
execute a different I/O test while another is already running.