XG700 User's Guide
176/266
All Rights Reserved, Copyright (C) PFU LIMITED 2005-2006
5.15.5 monitor qos-priority-traffic-counts
Function
Displays the number of frames received at each port for each QoS priority.
Prompt
xg> or xg#
Command syntax
monitor qos-priority-traffic-counts { current | total } [interval <3-60>]
Parameter
{ current | total }
Specifies the statistics to be displayed.
−
current
Displays the cumulative number of frames in each QoS priority which have been received after startup of this
command.
−
total
Displays the cumulative number of frames in each QoS priority which have been received after the system
startup.
interval <3-60>
Specifies the statistics updating interval (in seconds).
The default interval is 3 seconds
Command type
Operation management command
Output format (if "current" is specified)
xg# monitor qos-priority-traffic-counts current
Qos Priority Traffic Statistics(Current Frame Counts) 2005/08/22-12:12:15
=============================================================================================
Port Priority-0 Priority-1 Priority-2 Priority-3
Priority-4 Priority-5 Priority-6 Priority-7
Counts
Counts Counts Counts Counts Counts Counts
Counts
---- ----------- ----------- ----------- ----------- ----------- ----------- ----------- -----------
1 1234567890K 1234567890K 1234567890 1234567890 1234567890 1234567890 1234567890 1234567890
2
0 0 0 0
0 0 0 0
3 1234567890K 1234567890K 1234567890K 1234567890K 1234567890K 1234567890K 1234567890K 1234567890K
4 1234567890M 256890M 256890M 256890M 256890M 256890M 256890M 256890M
5 1234567890G 256890G 256890G 256890G 256890G 256890G 256890G 256890G
6 1234567890T 256890T 256890T 256890T 256890T 256890T 256890T 256890T
7
0 0
0 0
0
0
0
0
8
0 0
0 0
0
0
0
0
================================================================================================
ESC:exit F:refresh
U:page up D:page down L:page left R:page right
Port
Displays port numbers. Statistics of each port are displayed on a line.
Priority-0 Counts to Priority-7 Counts
Display the cumulative number of frames in each of priorities 0 to 7 which have been received at each port after the
command execution, using 10-digit, right-justified values.
Output format (if "total" is specified)
xg# monitor qos-priority-traffic-counts total
Qos Priority Traffic Statistics(Total Frame Counts) 2005/08/22-12:12:15
===============================================================================================
Port Priority-0 Priority-1 Priority-2 Priority-3 Priority-4 Priority-5 Priority-6 Priority-7
Counts Counts Counts Counts Counts Counts Counts Counts
---- ----------- ----------- ----------- ----------- ----------- ----------- ----------- -----------
1 1234567890K 1234567890K 1234567890 1234567890 1234567890 1234567890 1234567890 1234567890
2 0 0
0 0
0 0
0 0
3 1234567890K 1234567890K 1234567890K 1234567890K 1234567890K 1234567890K 1234567890K 1234567890K
4 1234567890M 256890M 256890M 256890M 256890M 256890M 256890M 256890M
5 1234567890G 256890G 256890G 256890G 256890G 256890G 256890G 256890G
6 1234567890T 256890T 256890T 256890T 256890T 256890T 256890T 256890T
7 0
0
0 0
0
0
0
0
8 0
0
0 0
0
0
0
0
================================================================================================
ESC:exit F:refresh
U:page up D:page down L:page left R:page right
The values displayed in the “Counts” column are the ones cumulated after the system startup. Other values are the same as
those displayed if the “current” option is specified.