XG Series User's Guide
Chapter 5 Command Reference
Mode and Terminal Operation Commands
336
5.17 Mode and Terminal Operation
Commands
This section explains about mode and terminal operation commands.
5.17.1
Mode Operation Commands
This section explains about mode operation commands.
5.17.1.1 admin
Function
Switch to the admin class.
Available Model
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax
admin
Options
N/A
Use Mode
Operation mode (user class)
Explanation
Switch from the user class to the admin class.
This command has the same function as the
command.
Before switching, enter the administrator password, when asked.
To return from the admin class to the user class, execute the
command.
Caution
The settings of the "terminal" and
commands will not be inherited by the
administrator mode.
Message
Enter an administrator password.
Switching to the admin class was failed due to the incorrect administrator password.
Enter the correct administrator password.
The administrator password is not set.
Set an administrator password.
The administrator password is seven or fewer characters in length.
Set an administrator password with eight or more characters.
The administrator password consists of only alphabetic characters or only numeric
characters.
Set an administrator password with alphanumeric characters and symbols mixed.
Password:
<ERROR> Authentication failed
<WARNING> weak admin password: set the password
<WARNING> weak admin password: contain at least 8 characters
<WARNING> weak admin password: contain a different kind of character
