manualshive.com logo in svg

Fujitsu XG0224, User Manual, Page: 324 / 631

Share
Download
Fujitsu XG0224 User Manual Download Page 324

XG Series User's Guide

Chapter 5 Command Reference

Device Information Settings

324

5.15.8.32 serverinfo dns filter

Function

Set the application filter for the DNS server function.

Available Model

XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600

Syntax

serverinfo dns filter <count> <action> acl <acl_count>

Options

<count>
•

Filtering definition number
Specify a definition number, which indicates a filtering priority, with a decimal value 
from 0 to 29.
A smaller value has a higher priority.

<action>

Specify an operation when filtering conditions are satisfied.

•

accept
Transmit the relevant packet.

•

reject
Block the relevant packet.

<acl_count>
•

ACL definition number
Specify the required ACL definition number with a decimal value.
If the ACL specified in <acl_count> is not specified, the filtering definition will be 
disabled and ignored.
The following ACL definition is available for application filtering.
- ip

Set only the source IP address and the number of mask bits.
If the ip value is not set, the filtering definition will be disabled and ignored.

- ip6

Source IPv6 address and the prefix length are used for the filter.
If IPv6 value has not been set, the filtering definition will be disabled and ignored.

Use Mode

Configuration mode (admin class)

Explanation

Set the application filter for the DNS server function.

Default

It is assumed that the application filter is not set for the DNS server function.

Summary of Contents for XG0224
























































































































































































































































































































































































































































































































































































































































Reviews:

No comments