XG Series User's Guide
Chapter 5 Command Reference
Device Information Settings
313
5.15.8.14 serverinfo sftp ip6
Function
Set the IPv6 SSH FTP server function
Available Model
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax
serverinfo sftp ip6 <mode>
Options
<mode>
•
on
Enable IPv6 SSH FTP server function
•
off
Disable IPv6 SSH FTP server function
Use Mode
Configuration mode (admin class)
Explanation
Set whether or not to enable IPv6 SSH FTP server function
Setting this command OFF and the
command OFF will reject a
connection request using the IPv6 address from the sftp client.
Setting this command OFF and the
connection request using the IPv6 address from the sftp client after the password was
entered.
Caution
Enabling this command generates an SSH host authentication key at device power-on or
execution of the
command, and it takes several tens of seconds to several
minutes for the processing time. sftp connection is enabled after the SSH host
authentication key generation was completed.
If this device has been started to enable this function while all the ssh and sftp functions
were Off, it also takes several tens of seconds to several minutes for the processing time
to generate an SSH host authentication key. Note that other processes may be affected;
session monitoring timeout may occur, for example.
Default
It is assumed that the IPv6 SSH FTP server function is enabled.
5.15.8.15 serverinfo telnet
Function
Set the TELNET server function.
Available Model
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax
serverinfo telnet ip <mode>
Options
<mode>
•
on
Enable the TELNET server function.
•
off
Disable the TELNET server function.
Use Mode
Configuration mode (admin class)
Explanation
Set whether or not to enable the TELNET server function.
Default
It is assumed that the TELNET server function is enabled.
serverinfo sftp ip6 on
serverinfo telnet ip on
