XG Series User's Guide
Chapter 5 Command Reference
Mode and Terminal Operation Commands
342
5.17.1.9 !
Function
Return to the previous class, mode or configuration directory.
Available Model
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax
!
Options
N/A
Use Mode
Operation mode (admin class)
Configuration mode (admin class)
Explanation
In the operation mode, the Use Mode class returns to the user class if it has been
switched from the user class to the admin class using the
command. Otherwise
the operation mode still remains unchanged without logout.
In the configuration mode, the current directory will be moved up to the next higher one
when the configuration directory function is enabled in a directory other than the top
directory. Otherwise, if the configuration has not been changed, the configuration mode
returns to the operation mode, but if the configuration has been changed, the
configuration mode still remains unreturned with an error message.
For the configuration directory function, refer to the
This command is almost the same as for the
command except that logout does not
occur in the operation mode.
Execution Example
# configure
(Switch to the configuration mode)
(config)# !
(Return to the operation mode)
# !
(Still remain without logout)
#
