Fujitsu SRS-1050, User Manual

Page: 83 / 140

Chapter 3 ( SRS -1050 Local Features
Page 3-29
5. To quit the History mode, press
EXIT.
The menu of message logging
options appears again.
To stop message logging and
save all messages in the his tory
file before returning to normal
operations, dial 2 and press
ENTER. The screen displays the
message MESSAGE LOGGING
STOP.
6. To return to normal operations,
press REG (softkey 4).
The standard display screen
reappears.
ACTIVATING AND
DEACTIVATING THE MIC-OFF
BUTTON
The MIC-OFF button (the button
at the upper right of the
multifunction button array)
controls the microphone during
handset or handsfree operation.
With this button activated as the
MIC-0FF button, you can turn off
the microphone while on a call to
talk privately to people around
you, and then press MIC-OFF
again to continue your phone
conversation.
If you deactivate MIC-OFF,
assign button 18 as a one-touch
button or a delimiter button, and
then try to reactivate MIC-OFF,
the button's LED turns red as a
warning. You must quit the
procedure (press * to return to
the menu mode main menus) and
cancel the one-touch number or
delimiter assignment on button 18
before you can reactivate MIC-
OFF.
To activate or deactivate MIC-
OFF, follow these steps:
1. Press REG (softkey 4), 12,
ENTER (softkey 1). A screen
appears showing you the
current status of MIC-OFF.
MIC-OFF KEY MODE
NON SUPPORTED
2. Press ENTER again and this
menu appears:
1:SUPPORT 2:NO SUPPORT
(SELECT 1-2)
The LED next to button 18
indicates its current state:
•
Off : Unassigned
•
Green : Already active as
MIC-OFF
•
Red : Assigned as a one-
touch or delimiter
button