manualshive.com logo in svg

Fujitsu SRS-1050, User Manual, Page: 68 / 140

Share
Download
Fujitsu SRS-1050 User Manual Download Page 68

SRS -1050 Local Features  

(

 

Chapter 3 

Page 3-14 

2.  Press 2, ENTER, and this screen 

appears:  

 

SUPPORTED (SELECT) 
SELECT ASSIGN KEY 

 
If ALL (default) was previously 
set, all feature buttons light green. 
 
Only Call Appearances with lit 
LEDs will log unanswered calls.  
Press the buttons to turn the 
LEDs on or off to select the Call 
Appearances for which you want 
to log unanswered calls.  
 

3. Press ENTER when done, and 

this screen appears:  

 

SUPPORTED  (SELECT) 
  COMPLETED 

 
After about 15 seconds, or if you 
press asterisk (*), the display 
returns to the second Service 
Mode screen:  
 

4: UNA                    5: H-FREE 
6: HAND/HEAD     SELECT ITEM       (1-12) 

 

4. You can now select a different 

menu function, or press REG 
(softkey 4) to return to the 
normal display. 

 
 
 
 
 
 

Disabling the UNA Feature 

 
To disable unanswered call 
logging, follow these steps:  
 

1. Press REG (softkey 4), 4, ENTER 

(softkey 1). 

 

If the following screen appears, 
the feature is enabled:  
 

UNA SERVICE MODE 
  SUPPORTED  (ALL) 

 
To leave it as is, press REG again. 
 

2. To disable UNA, press ENTER.  

This screen appears:  

 

1: ALL                        2: SELECT 
3: NO SUPPORT     SELECT ITEM           
(1-3) 

 

3. Now press 3, ENTER, and this 

screen appears:  

 

NON SUPPORTED 
  COMPLETED 

 
After about 15 seconds, or if you 
press asterisk (*), the display 
returns to the second Service 
Mode screen:  
 

4: UNA                   5: H-FREE 
6: HAND/HEAD     SELECT ITEM            (1-
12) 

 

Summary of Contents for SRS-1050













































































































































Reviews:

No comments