manualshive.com logo in svg

Fujitsu SRS-1050, User Manual, Page: 63 / 140

Share
Download
Fujitsu SRS-1050 User Manual Download Page 63

Chapter 3 

(

  SRS -1050 Local Features  

 

Page 3-9 

•

  Before pressing ENTER to 

record the number, press 
CLEAR (softkey 3) to erase the 
number.  Then enter the correct 
number. 

 

•

  After pressing ENTER, if the 

number on the COMPLETED 
screen is incorrect, press the 
multifunction button again.  
The ENTER DIRECTORY 
NUMBER screen appears 
showing the incorrect number.  
Enter the correct number and 
then press ENTER.  The correct 
number appears on the display 
as y ou enter it and replaces the 
incorrect number. 

 
 

Changing or Canceling the 
Number Stored in a One-
Touch Button 

 
To change or cancel the one-
touch number currently stored on 
a one-touch button, follow these 
steps: 
 

1. Press the assigned one-touch 

button (it shows a green 
indicator), and then press the 
replacement numbers on the 
keypad, or clear the Directory 
Number by pressing CLEAR 
(softkey 3).  You can also leave 
the button as it was, by 
pressing another button or REG 
(softkey 4). 

 
 

 

 

If you press CLEAR, you can 
then choose one of the following: 
 

a. Enter new keypad numbers, 

followed by ENTER (softkey 
1).  The button then has the 
new number stored. 

 

or 

 

b. Select another button to 

become one-touch, then do 
steps 3 & 4 from 
Programming a One-Touch 
Button.  This leaves the 
original button with its old 
number. 

 

or 

 

c. Cancel the preset button by 

pressing ENTER.  Its LED 
turns off.  It is no longer a 
one-touch button.  The 
following screen appears: 

 

DN=                           (12) 
   COMPLETED 

 
The word COMPLETED remains 
for 15 seconds. 
 

2. You can then select another 

button to make one-touch and 
do steps 3 & 4 from 
Programming a One-Touch 
Button. 

 

3. To return to the menu screen 

after the word COMPLETED 
appears, press asterisk (*). 

 

Summary of Contents for SRS-1050













































































































































Reviews:

No comments