Fujitsu SPARC M10-4, Service Manual, Page: 227 / 514

XSCF> showlogs error
XSCF>
showpparstatus -a
XSCF>
replacefru
XSCF>
showlogs error
For details, see " 5.1.1 Releasing an FRU of the SPARC M10-4/M10-4S from the
system ."
10.3.2 Inactive/Hot maintenance
For a single-chassis configuration
1.
Open the rack door.
2.
Log in to the XSCF shell.
3.
Execute the showlogs command to identify the component requiring
maintenance.
For details, see " 3.3.5 Checking log information ."
4.
Confirm the hardware and software configurations.
For details, see " 4.2 Confirming the System Configuration ."
5.
Stop the entire system.
For details, see " 5.4 Stopping the Entire System ."
6.
Execute the showpparstatus command to confirm that the physical partition
requiring maintenance is powered off.
7.
Execute the replacefru command to release the power supply unit requiring
maintenance from the system.
For details, see " 5.1.1 Releasing an FRU of the SPARC M10-4/M10-4S from the
system ."
For a building-block configuration
1.
Open the rack door.
2.
Log in to the XSCF shell.
3.
Execute the showlogs command to identify the component requiring
maintenance.
For details, see " 3.3.5 Checking log information ."
Chapter 10 Maintaining the Power Supply Units 203