manualshive.com logo in svg

Fujitsu PrintPartner, User Manual

Share
Download
Fujitsu PrintPartner User Manual Download Page 48

User’s Manual

2-1

PRINTING AND
PAPER HANDLING

2

CHAPTER

Printing and Paper Handling

This chapter provides information you may need for day-to-day
printing. The topics are:
• Control panel tutorial

The tutorial describes the indicators, message display, and buttons.
It includes an example of how to use the control panel.

• Control panel functions

This section describes the functions by buttons.

• Menu functions

This section describes how to use the control panel for customizing
printer defaults.

• Handling paper

This section describes how to print on various types of paper.

This section introduces the printer’s control panel, beginning with a
description of the indicators, message display, and buttons. The
tutorial describes the use of the buttons in some detail and follows
with an example.

The Control Panel

The control panel consists of four indicators, a message display, and
eight buttons. The physical buttons are beneath the LCD display.
The top row of labels represents basic functions. The bottom row of
labels represents secondary functions. See later in this section for a
list of functions.

Control Panel
Tutorial

Summary of Contents for PrintPartner




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands