Fujitsu PrintPartner, User Manual

Page: 147 / 179

5-20 User’s Manual
Message Causes and solutions
TONER LOW n Cause: Toner low occurs when toner low
Press Continue mode in the Config. menu is set to STOP.
1: First level; 2: Second level;
3: Third level and after
The printer stops when this codition is
detected (factory default).
Solution: • If you satisfy the print quality,
press the
CONT.
button to continue
printing. Prepare a new developer unit.
• If you satisfy the print quality and the
printer just displays this message (continue
mode), prepare a new developer unit.
• If you cannot satisfy the print quality,
replace the developer unit. Press the
ENTER
button when the confirmation
message is displayed after the upper door is
closed.
TRAY n MISS SET Cause: Paper tray installed incorrectly
Solution: Install the paper tray.
TRAY n PAPER OUT or Cause: Paper out in the specified paper
MFF PAPER OUT source
Solution: Supply paper.
WAIT TIMEOUT Cause: Printer did not receive a job end in
the prescribed time. (This error occurs
when FPS emulation is active.)
Solution: Press the
CONT.
button.
Action-required Status Indications