56
Operating Manual
TX2540 M1
Hardware installation
5.4
Connecting devices to the server
The connectors for external devices are on the front and rear of the server. The
additional connectors available on your server depend on the expansion cards
installed. For further information refer to the "FUJITSU Server PRIMERGY
TX2540 M1 Server Upgrade and Maintenance Manual".
Figure 2: Connection panel on the rear
The corresponding indicators are explained in section
"Rear of server" on
page 73
.
I
Some of the devices connected require special software (e.g. drivers)
(see documentation for the connected device).
Ê
Connect the devices.
1
Serial connector COM1* (turquoise) 4
Standard LAN connector
2
Video connector (blue)
5
4 USB connectors (black)
3
Management LAN connector
6
Shared LAN connector
* The serial interface COM1 can be used as the standard interface or for
communication with iRMC S4.
Summary of Contents for PRIMERGY TX2540 M1
