Fujitsu PRIMERGY TX150 S8, Upgrade And Maintenance Manual, Page: 90 / 430

90 Upgrade and Maintenance Manual
TX150 S8 / TX200 S7
Basic software procedures
After replacing the Chassis ID EPROM
I
In case of the PRIMERGY TX150 S8 / TX200 S7 server, the Chassis ID
EPROM is integrated on the front panel board.
Ê
Check the SEL log files as described in section "Viewing and clearing the
System Event Log (SEL)" on page 97 to verify whether a backup copy of the
system board settings has been transferred to the Chassis ID EPROM:
Chassis IDPROM: Backup successful
5.2.3 Updating RAID controller firmware
After replacing the RAID controller, it is essential to upgrade the firmware to the
latest version. The latest RAID controller firmware version is available from the
Fujitsu support web pages at:
http://ts.fujitsu.com/support/ (global market)
http://jp.fujitsu.com/platform/server/primergy/downloads/ (Japanese market)
I
Fujitsu does not assume responsibility for any damage done to the
server or for the loss of any data resulting from firmware updates.
For the Japanese market, follow the instructions provided separately.
Using the ServerView Update Manager
For a detailed description on how to update the RAID controller firmware using
the ServerView Update Manager or Update Manager Express (UME), please
refer to the following manuals:
– ServerView Update Manager:
"ServerView Update Management" user guide
– ServerView Update Manager Express:
"Local System Update for PRIMERGY Servers" user guide
Using the flash tool
The latest firmware files are available as ASPs (Autonomous Support
Packages) for Windows or as DOS tools from the Fujitsu support web pages at:
http://ts.fujitsu.com/support/ (global market)
http://jp.fujitsu.com/platform/server/primergy/downloads/ (Japanese market)
Ê
Select Drivers & Downloads .