Fujitsu PRIMERGY TX150 S8, Upgrade And Maintenance Manual, Page: 110 / 430

110 Upgrade and Maintenance Manual
TX150 S8 / TX200 S7
Power supply units
6.1 Basic information
The PRIMERGY TX150 S8 / TX200 S7 server can be equipped:
– with a standard power supply unit (permanently built-in)
The power supply unit adjusts automatically to any mains voltage in the
range of 100 V - 240 V.
– or up to two hot-plug power supply units (slide-in units)
In its basic configuration, the server has one power supply unit that adjusts
automatically to any mains voltage in the range of 100 V - 240 V. Besides
the power supply unit, a second power supply unit can be installed optionally
to serve as a redundant power supply. If one power supply unit fails, the
second power supply unit in the redundant configuration ensures operation
can continue uninterrupted and the defective power supply unit can be
replaced during operation (hot-plug).
V
CAUTION!
The server supports a mains voltage in the range of 100 VAC to
240 VAC. You may only operate the server if its rated voltage range
corresponds to the local mains voltage.
6.1.1 Power supply unit configurations
Depending on the server model, the following power supply unit configurations
are possible:
Standard PSU Hot-plug PSU
800 W 500 W max 2x 800 W max2x 450 W
PRIMERGY
TX150 S8
o o
PRIMERGY
TX200 S7
o o o