Fujitsu PRIMERGY TX1310 M1, Upgrade And Maintenance Manual

Page: 138 / 232

138 Upgrade and Maintenance Manual
TX1310 M1
Main memory
10.3 Removing memory modules
10.3.1 Preliminary steps
Ê
"Disabling BitLocker functionality" on page 63
Ê
"Shutting down the server" on page 40
Ê
"Disconnecting the server from the mains" on page 41
Ê
"Removing the side cover" on page 42
10.3.2 Removing a memory module
Ê
Identify the desired memory slot according to the mounting order described
in section
"Memory sequence" on page 134 .
V
CAUTION!
Ensure to maintain an operational configuration when removing
memory modules. For additional information, please refer to section
"Operation modes" on page 135 .
Figure 84: Removing memory modules
Ê
Eject the desired memory module by pressing out the securing clips at each
end of the memory module connector (1).
Ê
Remove the ejected memory module (2).
Upgrade and Repair Unit
(URU) Hardware: 5 minutes
Tools: tool-less
/
/
0