Fujitsu PRIMERGY TX100 S2, Operating Manual

Page: 37 / 92

TX100 S2 Core Edition
Operating Manual 37
Installing the hardware
4.2 Setting up the server
V
CAUTION!
Follow the safety instructions in chapter "Important notes" on page 23 .
Ê
Set up the server.
V
CAUTION!
– The device must be protected from direct sunlight.
– Ensure that the minimum clearances (see "Ventilation clearance"
on page 19 ) are observed.
– Access to the rear of the server must be assured so that other
devices (e.g. memory subsystems) can be connected.
– The mains plug must be accessible easily and safely.
– A clearance of at least 200 mm must be maintained in front of and
behind the system to ensure proper ventilation.
Ê Wire the server. Read the information in section "Connecting devices to the
server" on page 38 and section "Notes on connecting/disconnecting cables"
on page 41 .
Ê Connect the system to the mains (see section "Connecting the server to the
mains" on page 40 ).