40
Operating Manual
TX100 S2 Core Edition
Installing the hardware
4.4
Connecting the server to the mains
The server is fitted with a built-in power supply.
V
CAUTION!
The power supply unit automatically adapts to a mains voltage between
100 V - 240 V. Make sure that your local mains voltage is within the
range.
Figure 3: Connecting the server to the mains
Ê
Connect the insulated connector of the power cable to the power supply unit
of the server (1).
Ê
Insert the mains plug into an grounded power outlet (2) in the internal supply
network.
/
0
