74
Operating Manual
TX100 S2 Core Edition
Installation and operation
I
If the operating system does not switch off the server automatically, press
the On/Off button for at least four seconds to send a control signal for
power button override.
Switching off the server from the Maintenance and Recovery Manager
See section
"Rebooting or shutting down the server" on page 67
5.7
Other On/Off options
Besides the On/Off button, the server can be switched ON and OFF in the
following ways:
–
Timer-controlled switch-on/off
Using the ServerView Operations Manager, you can configure that the
server is switched on/off controlled by the internal timer.
–
Ring indicator (from modem)
The server is switched on by an external modem.
–
Wake up On LAN (WOL)
Allows the server to be switched on or woken up by a network command
(Magic Packet
TM
). WOL functionality is enabled in the BIOS by default.
–
After power failure
The server automatically reboots following a power failure.
–
Power button override
The system can be switched off by pressing and holding down the On/Off
button (for approximately 4 - 5 seconds). The system remains in Off state.
V
CAUTION!
There is a risk that data may be lost.
