SX940
Review
31
Different configurations
LSI 1078 controllers
Ê
Plug the connector named P2 of the SAS cable into the connector on the
HDD diskbay 2/3 (4).
Ê
Plug the power cable for the HDD 0/1 from connector J3 on main board #2
onto the connector J4 of main board #1.
Figure 17: Position of the jumper: Four HDDs using one LSI 1078 controller
Ê
Plug the jumper (blue circle) on the HDD diskbay 2/3 from the position 1-2
(default) to 2-3 (upper two pins, see graphics).
V
CAUTION!
All unused cable ends have to be equipped with protective caps to avoid
short curcuits!
I
The second SAS cable stays unused in the housing. It has to be fixed by
a cable clamp.
1
2
2
3
Summary of Contents for PRIMERGY SX940
