![background image](http://html.mh-extra.com/html/fujitsu/primergy-sx940/primergy-sx940_manual_121199018.webp)
18
Review
SX940
Controller
Replacement routines
4.2.1
Replacing controller
The replacing of a controller wil be described exemplary at the following config-
uration:
–
One LSI 1064 controller for two HDDs
I
For the further configurations see
chapter “Different configurations” on
page 23
Ê
Remove the storage blade as described in
section “Removing the storage
blade” on page 13
.
Ê
Open the storage blade as described in
section “Opening the storage blade”
on page 14
Figure 5: Removing the controller
Ê
Remove the SAS cable from the controller (1).
I
Do not bend SAS cables!
Ê
Remove the screw (blue circle).
Ê
Pull the controller out of the contact strip of the main board (2).
Installing will be done in the reverse order.
1
2
Summary of Contents for PRIMERGY SX940
