82
Even when the power switch is set to "R", the power cannot be
turned off.
(Power LED does not blink green)
The cables in this product are
connected correctly?
No
No
No
No
The connected server is running?
No
No
Boot the server.
This product may fail.
Contact maintenance support.
Connect them properly.
"2. Installing Internal Options" (p.56)
The power switch is set to "R"?
Set the power switch to "R".
All the connected servers' power
are turned off?
The Term Power settings of the
drive that is installed is set to
"OFF"?
No
No
No
No
Turn off all the connected servers'
power.
No
No
Deal with this problem referring to
"Even when the power switch is set
to " ", the power cannot be turned
off." (p.80)
This product may fail.
Contact maintenance support.
Refer to each backup unit's manual
for the settings, and set the Term
Power setting to "OFF".
When setting the power switch to
" ", the power is turned off?
Summary of Contents for PRIMERGY SX10 S2
