Fujitsu PRIMERGY SX10 S2, User Manual

Page: 66 / 94

66
2.4
Installing a Backup Unit
This section explains the installation of backup units.
2.4.1 Usable Backup Units
Installation order
Install the backup units in ascending order of drive bay number from Drive bay 1.
2.4.2 How to Install a Backup Unit
The following is an explanation of an example of when installing a backup unit in Drive bay 1.
1
Turn off this product, unplug the power cable, and then remove the
top cover.
"2.1 Attaching/Removing the Top Cover"(p.56)
2
Turn the grommets on the front panel (two locations) in the
direction shown in the figure below.
The front panel lock is released.
Product name Product ID
Exclusive
bay
Tape Drv LTO3 Ultrium3/Ultrium2 400GB PG-LT302 / PGBLT302
1 bay
Tape Drv LTO2 Ultrium2 200GB PG-LT201 / PGBLT201
Tape Drv LTO Ultrium1 100GB PG-LT102 / PGBLT102
Tape Drv DAT72 36GB internal PG-DT501 / PGBDT501
[Front]
Drive bay 2
Drive bay 1
Drive bay 3
Drive bay 4
Open