Fujitsu PRIMERGY SX10 S2, User Manual, Page: 71 / 94

3 Installing in a Rack
71
E
3.2
How to Install this Product in a Rack
1
Open both the front and rear doors of the rack.
2
Check that the locations where the slide rails and rack nuts will be
installed.
The slide rails are attached to the front and rear rack pillars. The rack nuts are attached to the
front pillars.
3
Check the right and left of the slide rails.
There is a right and left side slide rail. [RIGHT] is displayed on the right side toward the rack
pillar front, and [LEFT] is displayed on the left side.
Be sure to secure the rack with stabilizers to prevent this product from tipping over.
For details on installing the rack, refer to the rack manual provided with the rack.
When carrying this product, have a right and left side, and the bottom of the body by
two or more people.
The base line of this product
[Front Rack Pillars]
[Rear Rack Pillars]
1st and 3rd position
Align the pin locations.
[Left] [Right]
3U (device size)
3U (device size)
8th position (M5 Rack nut)
3rd position
(M5 Flat head screw)
Align the screw locations.