Fujitsu Primergy RX200 S4, User Manual

Page: 181 / 269

181
PRIMERGY RX200 S4 User's Guide
7.2.4 Boot Options Submenu
This submenu appears when selecting [Boot Options] from the [Main] menu.
Use this submenu to set system startup options.
table: Items on the Boot Options Submenu
Item Setting Description
POST Errors Halt On All Errors
(Unchangeable) Sets whether or not to stop the boot process and
shut down the system in case a Power On Self Test
(POST) error is detected.
• Halt On All Errors
Halts the system in case errors are detected by
POST at the time of its completion.
Keyboard Check • Disabled
• Enabled (Initial value) Sets whether or not to have POST perform a
keyboard connection confirmation.
SM Error Halt • Disabled (Initial value)
• Enabled Sets the procedure in case a fan or temperature
sensor error occurs.
Fast Boot Disabled (Unchangeable) Sets whether or not to reduce the scope of POST
and thereby speed up system startup.
Quiet Boot Disabled (Unchangeable) Sets whether or not to display the logo screen
instead of POST information.
NumLock Auto (Unchangeable) Sets the state of the Num Lock key when turning
the power on.
Boot Menu Enabled (Unchangeable) Sets whether or not to enable the Boot menu.
MultiBoot for HDs Enabled (Unchangeable) Sets whether or not to enable selection of which
hard disk unit to load the OS from, when multiple
hard disk units are installed.
PhoenixBIOS Setup Utility
Item Specific Help Boot Options
Main
[Halt On All Errors]
[Enabled]
[Disabled]
[Disabled]
[ Disabled ]
[ Auto ]
[ Enabled ]
[ Enabled ]
POST Errors:
Keyboard Check:
SM Error Halt:
Fast Boot:
Quiet Boot:
NumLock:
Boot Menu:
MultiBoot for HDs:
Boot Sequence: >