Power-on indicator / AC connected indicator (2)
Status
Description
off
The server is switched off and not connected to the
mains.
green on
The server is switched on.
flashing white
The iRMC firmware is starting up after the server has
been connected to the mains.
white on
The server is switched off and connected to the mains
(standby mode).
After connecting the server to the mains, it
will take about 60 seconds until the server
will enter standby mode and can be switched
on.
exchange flashing
green and white
The server has been switched on but Power Cycle
Delay settings delay it from turning on for a specified
time.
CSS indicator (3)
Status
Description
off
No critical event detected (CSS component).
orange on
Prefailure event detected (CSS component).
For HDDs, see also
flashing orange
CSS component failure detected.
Global Error indicator (4)
"iRMC-related status signals" on page 351
Status
Description
off
No critical event detected (non-CSS component).
orange on
Prefailure event detected (non-CSS component).
Appendix A
350
Upgrade and Maintenance Manual
RX1330 M5
Summary of Contents for PRIMERGY RX1330 M5
