Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual Download Page 300

Page: 300 / 413

▶

Remove all fan modules, see

"Removing the defective fan module" on

page 175

▶

Remove all riser modules, see

"Removing a riser module" on page 63

▶

Remove the system board, see

"Removing the defective system board" on

page 330

Removing BitLocker protection and decrypting the volume

▶

Before removing the TPM board, it is necessary to remove BitLocker

protection from the computer and to decrypt the volume. Ask the system

administrator to turn off BitLocker protection using the BitLocker setup

wizard available either from the Control Panel or Windows Explorer:

▶

Open Bitlocker Drive Encryption by clicking the

Start

button, clicking

Control Panel

, clicking

Security

, and then clicking

Bitlocker Drive

Encryption

Administrator permission required: If you are prompted for an

administrator password or confirmation, type the password or

provide confirmation.

▶

To turn off BitLocker and decrypt the volume, click

Turn Off BitLocker

and then click

Decrypt the volume

Decrypting the volume may be time-consuming. By decrypting the

volume, all of the information stored on that computer is decrypted.
For more information on how to disable BitLocker drive encryption,

see the Microsoft Knowledge Base. See the Fujitsu web pages for

more details.

Disabling the TPM in the system board BIOS

Proceed as follows:

▶

Switch on or restart your server.

▶

As soon as the startup screen appears, press the [F2] function key to enter

the BIOS setup menu.

▶

Select the

Advanced

menu.

▶

Select the

Trusted Computing

submenu.

System board and components

300

Upgrade and Maintenance Manual

RX1330 M5

Summary of Contents for PRIMERGY RX1330 M5






























































































































































































































































































































































































































Search results

Summary of Contents for PRIMERGY RX1330 M5

Reviews:

Related manuals for PRIMERGY RX1330 M5

Brands by name

Popular brands

Fujitsu PRIMERGY RX1330 M5, Upgrade And Maintenance Manual

Search results

Summary of Contents for PRIMERGY RX1330 M5

Reviews:

Related manuals for PRIMERGY RX1330 M5

Brands by name

Popular brands